Product Introduction
High density polyethylene (HDPE)
|
||||||
Brand | Density (ISO 1183-1/A) (g/cm³) |
Melt Finger (5kg,ISO1133) (g/10min) |
tensile modulus (ISO-527-2) (Mpa) |
Features | Specification grade | Use |
|
||||||
Hostalen GC7260 B |
0.96 | 23 | 1400 | High rigidity; easy to flow |
General Purpose Injection Molding | |
|
||||||
Hostalen 5831D B |
0.958 | 1.2 | 1320 | High rigidity; easy flow; Rigidity and ESCR balance |
small hollow | Stationery, Toys, Consumer packaging |
|
||||||
Hostal ACP 9255 B ★ |
0.957 | 0.4 | -- | multimodal HDPE; high stiffness; Elevation intensity; Excellent processability and bubble stability |
Blown film | Handbag, courier bag |
|
||||||
Hostalen 23050 B |
0.950 | 0.23 | -- | High rigidity; High ESCR; High toughness |
Pipe extrusion | Non-pressure pipe |
|
||||||
Hostalen GD7255 B ★ |
0.955 | 11 | 1200 | high rigidity | General Purpose Injection Molding | |
|
||||||
Hostal ACP 5331A B ★ |
0.952 | 0.28 | 1050 | High molecular weight; Rigidity and ESCR balance; Excellent impact strength |
Universal hollow | Large stacking barrels, 1-60 liter barrel |
|
||||||
Hostal ACP 5431Z B ★ |
0.954 | 2.7* | 1230 | High comprehensive performance; Excellent low temperature impact strength; high rigidity |
large hollow | closed barrel, open barrel |
|
* Test condition is 21.6kg
Polypropylene (PP)
|
||||||
Brand | "Melting means (2.16kg,ISO1133) (g/10 min)” |
tensile modulus (ISO-527-2) (Mpa) |
"Charpy Notched Impact Strength (23°C,ISO 179-1/1eA) (kJ/m2)” |
Features | Specification grade | Use |
|
||||||
Moping HP550J B |
3.2 | 1400 | 4 | Extrusion | Moulding, Yarn, Monofilament | |
|
||||||
Moping HP500N B |
12 | 1550 | 3 | medium-high mobility; Short molding cycle |
Injection Molding | Consumer Goods, Toys, Food Packaging, Gardening Supplies |
|
||||||
Moping HP525J B ★ |
3 | 1450 | 6** | Aluminized film, Single-layer or co-extruded double-drawn film |
BOPP | Food Packaging, Cosmetics, Composite Film |
|
||||||
Moping HP565S B ★ |
38 | 1250 | 3** | Narrow molecular weight distribution for high-speed production lines | Fiber, Spunbond | Diapers, crops, industrial carpets |
|
||||||
Moping HP648T B ★ |
53 | 1620 | 2 | Suitable for thin wall injection molding | thin wall injection molding | Food Packaging |
|
||||||
Moping EP400H B ★ |
1.7 | 1400 | 20 | High impact; medium rigidity | Extrusion/Thermoforming | Consumer Goods, Rigid Packaging |
|
||||||
Moping EP548R B ★ |
21 | 1500 | 6 | High rigidity and toughness balance; Medium flow; Antistatic |
Injection Molding | Toys, Furniture and Thin Wall Injection Molding |
|
**Izod notched impact strength (23°C,ISO 180-1/1eA)
*** Flexural Modulus
Low Density Polyethylene (LLDPE)
|
|||||
Brand | Density, g/cc | Melt index, 2.16kg | comonomer | Product Type | Use |
|
|||||
DFDC-7050 ★ |
0.918 | 2 | Butene | LLD membrane | Packaging bag, product bag (slip and anti-stick) |
|
|||||
DFDA-7042 | 0.918 | 2 | Butene | LLD membrane | Linings, ingredients |
|
|||||
DMDA-8007★ | 0.965 | 8.2 | Homopolymer | HD injection molding | Crate, container, trough |
|
Note: The above are typical attribute values and cannot be interpreted as specification restrictions.
* This product is planned for future production